Additional parts you may need for tuning your keyboards
Switch Stickers for Cherry MX Switches. One sheet can be applied to 45 MX Switches. Stickers are made in Korea. Buy as many as you need. For Example, MobiK layout needs 1 sheet 60 and TKL layout needs 2 sheets 108 layout needs 3 sheets
You can apply this in the KBD housing/case between the PCB and the Bottom. This 3.5mm thickness filler can help you get rid of unwanted noise or resonance. Tenkeyless Size Only Available.(User can cut into smaller sizes he wants.)
A needle for applying grease into smal spots like stabilizers. There are many ways to lub stabilizers. If you use grease, this can be a useful tool. And if you use Gel Flux, you can also use this. The hole(inner diamiter) is 0.8mm
Most popular and general Lubricant for Switch Sliders Net weight : 9g~10g 13g~14g(INCREASED) Higher model number of KRYTOX has higher VISCOSITY.(The higher number, the thicker) You can mix GPL 103 and 107 to get proper viscosity you want. They now come in "Spoid Bottles" for easier use when mixing. The Keyboard in the picture is not included. It is...
You can pull out CHERRY MX switches from your plate easily with this tool.(This does not mean you don't need desoldering switches. You have to desolder switches. This tool just helps you pulling out switches from the plate.) I recommend you to mod this tool(stock product)a little bit before you use it for pulling out switches. The video manual for this...